Fan Sink - HP ProDesk 600 Maintenance And Service Manual
Maintenance and service guide - hp prodesk 600 g1 tower, hp prodesk 600 g1 small form factor
Hide thumbs
Also See for ProDesk 600:
- Hardware reference manual (112 pages) ,
- Quickspecs (58 pages) ,
- Illustrated parts & service map (4 pages)
Table of Contents
Advertisement
Fan sink
Description
Fan sink
WARNING!
components to cool before touching.
NOTE:
System board appearance may vary.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Loosen the four silver captive Torx T15 screws that secure the heat sink to the system board.
CAUTION:
the downward forces on the processor. The pins on the socket are very fragile and any damage to
them may require replacing the system board.
70
Chapter 5 Removal and replacement procedures: Tower (TWR)
To reduce risk of personal injury from hot surfaces, allow the internal system
(Access panel on page
Remove fan sink retaining screws in diagonally opposite pairs (as in an X) to even
(Preparation for disassembly on page
38).
Spare part number
727142-001
37).
- Quick Links:
- Tower (Twr)
- Small Form Factor (Sff)
Hide quick links:
Advertisement
Table of Contents
