Front Bezel Security - HP EliteDesk 800 G3 TWR Maintenance And Service Manual

Front bezel security

The front bezel can be secured in place by installing a screw through the front of the chassis into the front
bezel.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the silver 6-32 security screw located inside the front bezel.
4. Replace the front bezel.
5. Install the security screw through the inside front of the chassis into the front bezel to secure the bezel
in place.
6. Replace the computer access panel.
22 Chapter 4 Removal and replacement procedures – Microtower (MT) chassis
(Preparation for disassembly on page
(Access panel on page 20)
19)