Front Bezel Security - HP EliteDesk 705 G4 MT Hardware Reference Manual

10. When you have completed all steps, all of the devices at your workstation will be secured.

Front bezel security

The front bezel can be secured in place by installing a 6-32 screw through the front of the chassis into the
front bezel.
1. Remove/disengage any security devices that prohibit opening the computer.
2. Remove all removable media, such as compact discs or USB flash drives, from the computer.
3. Turn off the computer properly through the operating system, and turn off any external devices.
4. Disconnect the power cord from the AC outlet and disconnect any external devices.
IMPORTANT:
as the system is plugged into an active AC outlet. To prevent damage to internal components, you must
disconnect the power cord from the power source before opening the computer.
5. Remove the computer access panel and front bezel.
48 Chapter 2 Hardware upgrades
Regardless of the power-on state, voltage is always present on the system board as long