Fan Sink - HP ProDesk 600 Maintenance And Service Manual
Maintenance and service guide - hp prodesk 600 g1 tower, hp prodesk 600 g1 small form factor
Hide thumbs
Also See for ProDesk 600:
- Hardware reference manual (112 pages) ,
- Quickspecs (58 pages) ,
- Illustrated parts & service map (4 pages)
Table of Contents
Advertisement
Fan sink
Description
Fan sink
The fan sink is secured atop the processor with four captive Torx screws. The fan sink includes a heat
sink and a fan.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the fan duct
4.
Loosen the four captive Torx T15 screws that secure the fan sink to the system board tray.
CAUTION:
the downward forces on the processor. This is especially important as the pins on the socket are
very fragile and any damage to them may require replacing the system board.
126
Chapter 6 Removal and replacement procedures: Small Form Factor (SFF)
(Access panel on page
(Fan duct on page
Remove fan sink retaining screws in diagonally opposite pairs (as in an X) to even
(Preparation for disassembly on page
86).
115).
Spare part number
727150-001
85).
- Quick Links:
- Tower (Twr)
- Small Form Factor (Sff)
Hide quick links:
Advertisement
Table of Contents
