HP ProDesk 600 Maintenance And Service Manual page 103

Maintenance and service guide - hp prodesk 600 g1 tower, hp prodesk 600 g1 small form factor
Hide thumbs Also See for ProDesk 600:
Table of Contents

Advertisement

4.
Open both latches of the memory module socket (1), and insert the memory module into the
socket (2).
NOTE:
A memory module can be installed in only one way. Match the notch on the module with
the tab on the memory socket.
Populate the black DIMM sockets before the white DIMM sockets.
For maximum performance, populate the sockets so that the memory capacity is spread as equally
as possible between Channel A and Channel B. Refer to
more information.
5.
Push the module down into the socket, ensuring that the module is fully inserted and properly
seated. Make sure the latches are in the closed position (3).
6.
Repeat steps 4 and 5 to install any additional modules.
The computer should automatically recognize the additional memory the next time you turn on the
computer.
Populating DIMM sockets on page 91
for
Memory
93

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prodesk 600 g1 towerProdesk 600 g1 small form factor

Table of Contents