Helpful Hints - HP ProDesk 600 Maintenance And Service Manual

If you recently installed new software, uninstall the software and see if the computer functions
●
properly.
Boot the computer to the Safe Mode to see if it will boot without all of the drivers loaded. When
●
booting the operating system, use "Last Known Configuration."
Refer to the comprehensive online technical support at http://www.hp.com/support.
●
Refer to
●
To assist you in resolving problems online, HP Instant Support Professional Edition provides you with
self-solve diagnostics. If you need to contact HP support, use HP Instant Support Professional Edition's
online chat feature. Access HP Instant Support Professional Edition at: http://www.hp.com/go/ispe.
Access the Business Support Center (BSC) at
support information, software and drivers, proactive notification, and worldwide community of peers
and HP experts.
If it becomes necessary to call for technical assistance, be prepared to do the following to ensure that
your service call is handled properly:
Be in front of your computer when you call.
●
Write down the computer serial number, product ID number, and monitor serial number before
●
calling.
Spend time troubleshooting the problem with the service technician.
●
Remove any hardware that was recently added to your system.
●
Remove any software that was recently installed.
●
Restore the system from the Recovery Disc Set that you created or restore the system to its original
●
factory condition in System Software Requirement Disks (SSRD).
CAUTION:
files before running the restore process.
NOTE:
For sales information and warranty upgrades (Care Packs), call your local authorized service
provider or dealer.

Helpful hints

If you encounter problems with the computer, monitor, or software, see the following list of general
suggestions before taking further action:
Check that the computer and monitor are plugged into a working electrical outlet.
●
Check that the voltage select switch (some models) is set to the appropriate voltage for your region
●
(115V or 230V).
Check that the computer is turned on and the white power light is on.
●
Check that the monitor is turned on and the green monitor light is on.
●
Helpful hints on page 149
Restoring the system will erase all data on the hard drive. Be sure to back up all data
in this guide.
http://www.hp.com/go/bizsupport for the latest online
Helpful hints
149