HP ProDesk 600 Maintenance And Service Manual page 124
Maintenance and service guide - hp prodesk 600 g1 tower, hp prodesk 600 g1 small form factor
Hide thumbs
Also See for ProDesk 600:
- Hardware reference manual (112 pages) ,
- Quickspecs (58 pages) ,
- Illustrated parts & service map (4 pages)
Table of Contents
Advertisement
6.
From the outside, rear of the computer, remove the three Torx screws that secure the power supply
to the rear of the chassis.
7.
From the inside of the chassis, press the release button at the front of the power supply (1).
8.
Slide the power supply forward (2), and then lift it out of the chassis (3).
To install the power supply, reverse the removal procedure.
CAUTION:
clip under the drive cage.
114
Chapter 6 Removal and replacement procedures: Small Form Factor (SFF)
When installing the power supply cables, make sure they are properly positioned in the
- Quick Links:
- Tower (Twr)
- Small Form Factor (Sff)
Hide quick links:
Advertisement
Table of Contents
