Chapter 6. Thinkserver Remote Management Module Web Console Options; Copyright Lenovo; Properties; Configuration - Lenovo ThinkServer TS430 User Manual

Remote management module
Hide thumbs Also See for ThinkServer TS430:
Table of Contents

Advertisement

Chapter 6. ThinkServer Remote Management Module Web
Console Options
This section describes every page of Web console and each page is divided into several parts corresponding
separately to the several tabs at the left side of the pane. In each part, there are detail illustrations and
introductions of each menu option in the left of the pane.
Notes:
• The first menu item of each tab is default page which will automatically appear when selecting the
corresponding tab.
• Click the HELP button on the right horizontal toolbar, and the Web console will show the relevant
information of each page.

Properties

By default, the home page of ThinkServer Remote Management Module shows the Properties page
including general information of the server.
This page provides the following server information:
Information
Product Name
Product Information
Firmware Version
Building Time
ASIC Type

Configuration

The Configuration page is used to configure Network Setting, Users Setting, Update, etc.

Network

The Network Settings page is used to configure the Network Settings. It includes the following options:
• Automatic (Obtain an IP address automatically): Automatically obtain the IP address (use DHCP).
• Manual (Use the following IP addresses): Manually configure IP address.
You can configure the Network settings by click ncsi0 item.
Option
MAC Address
IPv4 Settings
IPv6 Settings
VLAN Settings
© Copyright Lenovo 2011
Description
Customizable product name.
Customizable product description.
Firmware version information.
Date and Time of building BMC Firmware.
The server's platform.
Task Description
The MAC address of the devices (Read Only)
If you want to configure the IP by IPv4 protocol, enable
the IPv4, and set the IP address.
If you want to configure the IP by IPv6 protocol, enable
the IPv6, and set the IP address.
When you enable virtual LAN, you have to set the VLAN
ID, Priority also.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkserver

Table of Contents