Navigation - Lenovo ThinkServer TS430 User Manual

2. Enter the user name and password.
For example:
• Username = lenovo
• Password = lenovo
3. Click the OK button to view the home page of the Remote Management Module.
After a successful initial login, the system administrator can create new users and has full permission of
Remote Management Module.

Navigation

When the ThinkServer Remote Management Module is successfully logged on, the ThinkServer Remote
Management Module homepage will appear.
There are several tabs on the vertical toolbar which is at the left of the ThinkServer Remote Management
Module Homepage. By clicking these tabs, you can get the specific system information and take the
relevant tasks listed in the following table:
Tab
Properties
Configuration
Sessions
LDAP
Update
Utilities
Server Information
System Event Log
8
ThinkServer Remote Management Module User Guide
Features
System Information will show in Properties page
By clicking this tab, you can configure various settings of
the server. this tab allows accessing the following items:
• Network
• Network Security
• Security
• Users
• Services
• IPMI
This page allows you to view information about the active
sessions.
This page provides the mechanism to configure LDAP.
In this page, you can update firmware images via a series
of steps.
This page allows you to reboot the service processor or
reset it to default.
By clicking this tab, you can access the sensor and event
log. Sensor Readings page will automatically show. In
general, this tab allows accessing the following items:
• Power
• Thermal
This page lists system-critical events, with the date and
time the event occurred.