Chapter 2. Overview Of Lenovo Thinkserver Remote Management Module; Features Of Thinkserver Remote Management Module - Lenovo ThinkServer TS430 User Manual

Chapter 2. Overview of Lenovo ThinkServer Remote
Management Module
This section briefly describes the features of the Remote Management Module.
The Remote Management Module runs on the server system as an integrated solution and integrates
the embedded operating system. Independent of the server operating system, the embedded operating
system can provide a whole set of complete, stable and effective solution for the server. As a system
administrator, you can respond anytime and anywhere to emergency failure and take remote control on
the server through the network.

Features of ThinkServer Remote Management Module

ThinkServer Remote Management Module is easily accessible by remote KVM and controllable via LAN
or Internet. It will digitize and compress the collected video signal, keyboard, mouse signals and then
send to the remote console. Embedded with remote access and related control software, the module
also allows integrated remote power management via IPMI. Key features of the Remote Management
Module are as follows:
• Embedded Web UI - Remote power on / off, system health, system information, alert notification and
event log
• USB 2.0 media redirection - boot from remote media
• Security - open source SSL
• Compatible with IPMI V2.0
• KVM - allow remote viewing and configuring in the POST and BIOS setup utility
© Copyright Lenovo 2011 3