Chapter 3. Configuration Of Thinkserver Remote Management Module - Lenovo ThinkServer TS430 User Manual

Remote management module

Hide thumbs Also See for ThinkServer TS430:

Table of Contents

Chapter 3. Configuration of ThinkServer Remote Management

Module

This section describes how to use the server configuration utility to change the Remote Management Module

from the un-configured status to the running status. When first installed, the Remote Management Module

by default will search DHCP server on the network to automatically assign IP address, subnet mask and

gateway. It is recommended that users manually set a fixed IP address in the BIOS.

To set IP address, do the following:

1. Press F1 as soon as you see the logo screen.

2. From the BIOS setup menu, select Server Management ➙ BMC LAN Configuration ➙ Configuration

Source.

3. From the Configuration option, you can choose STATIC or DHCP to set IP address.

4. When you finish the configuration, please save the settings.

Table 1. IPMI 2.0 Configuration Sub-menu

Configuration Source

STATIC

DHCP

Static: static IP configuration. IP and

the subnet mask can be set manually.

DHCP: dynamic IP configuration. The

system can obtain IP automatically.

Table of Contents

Thinkserver