Changing The Diameter Of The Circle Frame - Brother BES Lettering Instruction Manual

Creating Lettering 49
Adjusting Text Width in the Circle
Frame
You can adjust the overall spacing between letters in Circle Text
with the Width Handle. This handle appears as a blue circle at
the lower-right side of your text.
To adjust the width, select the Circle Text tool, and click on the
text to select it. When you place your pointer in the Width
Handle, you will see that it changes to a small cross. By
dragging this handle, you will be able to adjust the width of the
text segment.
Note that the spacing between the lettering changes
proportionally as you increase and decrease the size of the
segment. To adjust the spacing between letters individually, see
"Adjusting the spacing between letters (kerning)" in the "Working
with individual letters" section of the manual.
To change the height and width at the same time, see "Adjusting
the size of text in the Circle Frame"
Changing the Diameter of the Circle
Frame
You can change the overall diameter of the baseline of your
Circle Text using the Rotation Handle. This is the orange circle
on the inner edge of the Circle Text frame. Place your mouse