Changing The Diameter Of The Circle Frame - Brother Pacesetter BES Lettering Instruction Manual

Creating Lettering 47
Note that the spacing between the lettering changes
proportionally as you increase and decrease the size of the
segment. To adjust the spacing between letters individually, see
"Adjusting the spacing between letters (kerning)" in the
"Working with individual letters" section of the manual.
To change the height and width at the same time, see "Adjusting
the size of text in the Circle Frame"
Changing the Diameter of the Circle
Frame
You can change the overall diameter of the baseline of your
Circle Text using the Rotation Handle. This is the orange circle
on the inner edge of the Circle Text frame. Place your mouse
over this handle and the pointer will change to a circle-arrow
handle . Then, drag in or out along a radius to increase or
decrease the diameter of your Circle Text segment.