Using The Color Sort Tool - Brother BES Lettering Instruction Manual

126 Pacesetter BES Lettering
Instruction Manual
 In the design workspace, right-click the segment(s) and
choose Move—Next Match.
 In the Sequence View area, right-click the segment(s) in
the list and choose Move—Next Match.
The selected segment appears in the sequence below the
previous group with the same thread color.

Using the Color Sort tool

The Color Sort
the same color used more than once into a design with a
minimum of color stops..
There are times that a color is used more than once in a design
by necessity. This occurs when colors need to overlay.
The Color Sort tool analyses a design to see if any colors are
repeated. It then looks to see if any of those repeated colors
can be combined into a single layer. If not, the color layers are
left intact..
Certain file types have color limitations that make color sort
unadvisable. In these cases, the designer ran out of colors and
had to re-use a color to complete the design. Also, some
designs use color stops to indicate an appliqué or a trim. Not all
file types have these functions built-in. In these cases, Color
Sort should be used with care.
tool enables you to rebuild a design that has