Pacesetter BES Lettering
The View Tab
The controls on the View tab allow you to change what appears
on your workspace; which panels are displayed, whether or not
commands and stitch points are shown in the design, and so on.
The areas found on this tab are Windows, Show/Hide, and
In the windows area, check the box to show the corresponding
window or panel, and uncheck it to hide that window or panel.
Sequence. Shows/hides the Sequence view.
Palette. Shows/hides the thread palette.
Properties. Shows/hides the properties panel.
Simulator. Shows/hides the sewing simulator.
Status. Shows/hides the status bar.
Check the boxes to show the corresponding symbols in the
Entry/Exit. Shows the position of the first and last points
in the sewing of a segment.
Commands. Displays icons in the workspace that show
where the color changes and trims are.
Stitch points. Shows the penetration points of the
Click on the Program Preferences
in which you can set the default machine settings, change the
units of measure, and choose settings for the workspace grid.
For more information on this dialog, see "Setting up your
button to open a dialog