Brother BES Lettering Instruction Manual page 40

38 Pacesetter BES Lettering
Instruction Manual
4 Select one of the paths from the Select a text path dialog.
The Select a text path box closes, and you see a blank text
frame of the chosen shape in the design window.
Select a font for you text by doing the following:
 In the Text area of Properties panel, click the down-arrow
to the right of the font field.
You see a list of fonts.
 Select the desired font from the list.
A preview of the newly selected font is now displayed at
the top of the properties panel.
 Click Apply in the Properties panel.
Important: If you choose a new font, but do not click Apply at
this stage, the text will revert to the font previously in use when
it is generated.
5 Type the desired text string.
6 Right-click to complete the text segment.
Your text appears in the design. You can now make any other
changes to the text segment in the Text Properties box.
For more information on changing text settings, see "Text
Properties".
7 Click Apply.
Your text will change accordingly.