Brother BES Lettering Instruction Manual page 12

10 Pacesetter BES Lettering
Instruction Manual
Adding Separators in the Quick Access
Toolbar
You have the option of also adding separators in the Quick
Access Toolbar. These are small vertical marks which appear
on the Quick Access Toolbar, and divide the commands into
groups for ease of use. A separator is added just the same way
as you add commands; select <separator> in the "Choose
commands" list and then click the Add >> button.
Here is an example of how the separators work. If you create an
arrangement of separators and commands in the Customize
dialog that looks like this,
The Quick access toolbar will be organized to look like this:
For more details, see the procedure outlined above,
"Customizing the Quick Access Toolbar.
You can change the position of a separator, or any command in
the Quick Access Toolbar. Select it in the box to the right in the
Customize dialog, and click the up and down arrows on the
right. This will move the command or separator relative to the
other commands in the Quick Access Toolbar.