Brother BES Lettering Instruction Manual page 70

68 Pacesetter BES Lettering
Instruction Manual
If you create your monogram using one of the special mono-
gram fonts, you will see that the Decor Field is active. To
choose the decor type for your monogram, you first create a
monogram segment, and choose a Decor Monogram style in the
font area (see "Creating Monograms" in the "Creating Lettering"
section of this manual). Click the down-arrow to the right of the
decor field, select a decor from the list, and then click Apply.
If you want to use one of the Decor monogram fonts without
the decor, there is the option to do so; just select decor option
"00", which is at the top of the list, and essentially means that
no decor is added.
Line Spacing
The Line Spacing parameter only applies to the Normal text
mode. This property controls the spacing between lines in multi-
line text segments. This quantity is expressed as percentage of
the Letter Height value.
Align
The Align setting is found only in Normal text mode and can be
applied to lettering segments with more than one line. This
property is equivalent to the alignment of paragraphs in word-
processors; you can align your text on the left, right, or center.
Changing Properties with the
Context Menu (Right-click)
You can right-click on any text object, regardless of its type, and
an edit menu will appear. This menu allows you to change
several important text properties, such as changing or resetting
frames.
Changing Text Modes
The Text Mode can be changed for an existing text object in
Pacesetter BES Lettering. You can change an existing text item
to Normal Frame, Path Frame, Vertical Frame, Circle Frame, or