Moving A Segment To The Start Or End Of The Design - Brother BES Lettering Instruction Manual

122 Pacesetter BES Lettering
Instruction Manual
Moving a Segment to the Start or
End of the Design
Use the Move First command to make the selected segment the
first one to be stitched. When a design is sewn, the first seg-
ment sewn is usually "on the bottom" or in the "back" of the
design. Use the Move Last command to make the selected seg-
ment the last one to be stitched. When a design is sewn, the
last segment sewn is usually "on top" or in the "front" of the
design.
To move a segment to the start of a design:
1 Select the segment(s) you want to move to the start of your
design.
2 Do one of the following:
 In the design workspace, right-click the segment(s) and
choose Move—First.
 In the Sequence View area, right-click the segment(s) in
the list and choose Move—First.
In the left image, the green letter A is originally the third segment in the
sewing order; after selecting Move–First, it will be behind all the other
segments, as shown on the right.
To move a segment to the end of a design:
1 Select the segment(s) you want to move to the end of your
design.
2 Do one of the following: