Add Designs Feature - Brother BES Lettering Instruction Manual

108 Pacesetter BES Lettering
Instruction Manual

Add Designs Feature

The Add Designs feature allows you to embellish the lettering in
your design with extra decorative embroidery. With Add
Designs, you can choose from among a wide variety of
embroidery accents, borders, frames, and appliqué shapes and
place them in you design using only the mouse buttons. These
designs come pre-loaded with your Pacesetter BES Lettering
software.
To use the Add Designs tool:
1 In the Home tab of the Ribbon, click on the Add Designs
tool.
You see an option menu.
2 From the option menu, choose any one of the following:
 Add Accent Design
 Add Appliqué Design
 Add Border Design
 Add Frame Design
Your pointer changes to a small cross, indicating that the Add
Designs tool is active. Notice that the heading in the
Properties Panel changes to Add Design.
3 In the Properties Panel, click on the down arrow in the
Accent, Appliqué, Border, or Frame field (whichever is
applicable) to display a list of available decor types.
Depending on whether you have chosen an Accent, Frame,
Border, or Appliqué, you will see a different set of options in
the list.
4 From the list, click on the one you wish to apply to the
design.