Network Setup - Kyocera FS-1028MFP Operation Manual

Network Setup

The following network settings are available.
• LAN Interface Setup ...8-127
• TCP/IP (IPv4) Setup ...8-128
• TCP/IP (IPv6) Setup ...8-128
• NetWare Setup ...8-129
• AppleTalk Setup ...8-131
• Protocol Detail ...8-134
LAN Interface Setup
Specify the settings for the LAN interface to be used. The default setting is Auto.
Use the procedure below to select the interface.
Sys. Menu/Count.:a b
1
Report
2 Counter
3 System
*********************
Login User Name:
*******************
Login Password:
System:
1 Network Setting
*********************
2 I/F Block Set.
3 Security Level
Network Setting: a b
1 *TCP/IP Setting
*********************
2 NetWare
3 AppleTalk
OPERATION GUIDE
1
[ Exit ]
L b
[ Login ]
2
a b
[ Exit ]
3
4
5
Default Setting (System Menu)
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
The System menu appears.
Press the or key to select [Network Setting].
Press the OK key. The Network Setting menu
appears.
Press the or key to select [LAN Interface].
or
8
8-127