Kyocera FS-1028MFP Operation Manual page 398

Management
Sys. Menu/Count.:a b
1
User/Job Account
*********************
2
User Property
3
Common Settings
Login User Name
*******************
Login Password:
User/Job Account:a b
1
User Login Set.
2 Job Account.Set.
*********************
3
Unknown ID Job
Job Account.Set.:a b
1
Each Job Account
2 Account. List
3
********************* Default Setting
Default Setting: a b
1 Apply Limit
*********************
2 Copy/Print Count
3
Counter Limit
11-30
2
[ Exit ]
3
L b
[ Login ]
NOTE:
5 for details on entering characters.
4
[ Exit ]
5
[ Exit ]
6
7
[ Exit ]
8
In the Sys. Menu/Count. menu, press the
key to select [User/Job Account], and then press
the OK key.
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-6 for
the default login user name and password.
Refer to Character Entry Method on Appendix-
In the User/Job Account menu, press the
key to select [Job Account. Set.].
Press the OK key. The Job Account. Set. menu
appears.
Press the or key to select [Default Setting].
Press the OK key. The Default Setting menu
appears.
Press the or key to select [Counter Limit].
or
or
OPERATION GUIDE