Counting The Number Of Pages Printed - Kyocera FS-1028MFP Operation Manual

Management

Counting the Number of Pages Printed

This counts the number of pages printed. Counts are classified into Total Job Accounting and Each Job
Accounting. A new count can also be started after resetting the count data which was stored for a certain period
of time.
Types of the counts are as follows.
Printed Pages
Scanned Pages
FAX TX Pages*
FAX TX Time*
*
Total Job Accounting/Resetting the Counter
This counts the number of pages for all accounts and resets the counts for those accounts together at the same
time.
Use the procedure below to check and reset the counter.
Sys. Menu/Count.:a b
4 User/Job Account
*********************
5 User Property
6
Common Settings
Login User Name
*******************
Login Password:
11-32
Item
Displays the number of pages copied and printed,
and the total number of pages used. You can also
use [Duplex Pages] and [Combine Pages] to check
the number of pages used.
Displays the number of pages scanned for copying,
faxing* and other functions, as well as the total
number of pages scanned.
Displays the number of pages faxed.
Displays the total duration of fax transmissions.
FAX functions available only in FS-1128MFP.
[ Exit
L b
[ Login
Detail
1
Press the System Menu/Counter key on the main
unit operation panel.
2
In the Sys. Menu/Count. menu, press the
key to select [User/Job Account], and then press
the OK key.
]
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-6 for
the default login user name and password.
]
or
OPERATION GUIDE