Kyocera FS-1028MFP Operation Manual page 261

Use the procedure below to select the emulation.
Sys. Menu/Count.:a b
7
Copy
8 Printer
*********************
9 Send
Printer:
1 Emulation Set.
*********************
2 EcoPrint
3 Override A4/LTR
Emulation Set.:
5
PCL6
6 KPDL
7 *KPDL(Auto)
*********************
OPERATION GUIDE
1
[ Exit ]
2
a b
[ Exit ]
3
4
a b
5
6
NOTE:
operation after selecting the emulation is different from
others.
If you select [KPDL], refer to page 8-70.
If you select [KPDL(Auto)], refer to page 8-70.
Default Setting (System Menu)
In the Sys. Menu/Count. menu, press the
key to select [Printer].
Press the OK key. The Printer menu appears.
Press the or key to select [Emuration Set.].
Press the OK key. Emuration Set. appears.
Press the or key to select the printer you want
to emulate.
Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
If you select [KPDL] or [KPDL(Auto)], the
or
8
8-69