Kyocera FS-1028MFP Operation Manual page 396

Management
Login User Name
*******************
Login Password:
User/Job Account:a b
1
User Login Set.
2
********************* Job Account.Set.
3
Unknown ID Job
Job Account.Set.:a b
4
Each Job Account
5 Account. List
6 Default Setting
*********************
Default Setting: a b
1 Apply Limit
*********************
2 Copy/Print Count
3
Counter Limit
Apply Limit:
1
Immediately
2 *Subsequently
*********************
3
Alert Only
11-28
3
L b
[ Login ]
NOTE:
5 for details on entering characters.
4
[ Exit ]
5
[ Exit ]
6
7
[ Exit ]
8
9
a b
[ Exit ]
10
11
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-6 for
the default login user name and password.
Refer to Character Entry Method on Appendix-
In the User/Job Account menu, press the
key to select [Job Account. Set.].
Press the OK key. The Job Account. Set. menu
appears.
Press the or key to select [Default Setting].
Press the OK key. The Default Setting menu
appears.
Press the or key to select [Apply Limit].
Press the OK key. Apply Limit appears.
Press the or key to select [Immediately],
[Subsequently] or [Alert Only].
Press the OK key.
Completed. is displayed and the screen returns to
the Default Setting menu.
or
OPERATION GUIDE