Kyocera FS-1028MFP Operation Manual page 395

Limit Pages:
(1 - 9999999)
Overwrite.
Are you sure?
z k Osaka GUI DESIGN
[ Yes
Applying Limit of Restriction
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
Immediately *
Subsequently
Alert Only
*
Use the procedure below to apply the restriction limit.
Sys. Menu/Count.:a b
1
********************* User/Job Account
2 User Property
3
Common Settings
OPERATION GUIDE
D b
**123456*pages
] [ No ]
Item
Job stops when the counter reaches its limit.
Printing/scanning of the job continues but the
subsequent job will be rejected.
Job continues while displaying an alert message.
The next job will be prohibited in sending or in storing in the box.
[ Exit ]
If you select [Counter Limit], enter the upper limit
number of pages in the next screen, and then press
the OK key.
5
Repeat step 3 to 4 to set items as necessary.
6
Press the OK key again. A confirmation screen
appears.
7
Press [Yes] (the Left Select key). The restriction of
use is changed. Registered. is displayed and the
screen returns to Account. List.
Description
1
Press the System Menu/Counter key on the main
unit operation panel.
2
In the Sys. Menu/Count. menu, press the
key to select [User/Job Account], and then press
the OK key.
Management
11
or
11-27