Kyocera FS-1028MFP Operation Manual page 334

Default Setting (System Menu)
Secure Protocol: a b
2 IPP Security
3
HTTP Security
4
********************* LDAP Security
LDAP Security:
1 *Off
*********************
2
LDAPv3/TLS
3
LDAP over SSL
SNMPv3 Setting
Sets up SNMPv3. The default setting is Off. Use the procedure below.
Refer to Protocol Detail on page 8-134 about the procedures.
8-142
6
[ Exit ]
7
8
a b
9
10
Press the OK key. Secure Protocol appears.
Press the or key to select [LDAP Security].
Press the OK key. LDAP Security appears.
Press the or key to select [Off], [LDAPv3/TLS]
or [LDAP over SSL].
Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
OPERATION GUIDE