Dell FORCE10 Open Automation Configuration page 78

Table 8-1. Web User Interface: Supported Operations (continued)
Interfaces > Management
Protocols > VRRP
Protocols > VRRP Brief
Protocols > BGP Summary
Protocols > BGP Neighbors
Protocols > OSPF Neighbors
Protocols > ISIS Neighbors
Diagnostics > ARP Table
Diagnostics > MAC Address Table Displays the learned MAC addresses from the forwarding table.
Diagnostics > Routing Table
Diagnostics > System Log
Diagnostics > VLANs
Diagnostics > VLAN Members
Utilities > Ping
Utilities > Traceroute
Settings > SmartUtils Credentials
78 | Web GUI and HTTP Server
Displays the status and IP address of management interfaces.
Displays the currently configured VRRP instances on a switch, including status and
session information.
Displays summary information on BGP sessions and status.
Displays summary information on BGP sessions.
Displays detailed information on current BGP sessions, including connected neighbors.
Displays detailed information on current OSPF sessions, including connected neighbors.
Displays detailed information on current ISIS sessions, including connected neighbors.
Displays the learned MAC address-to-IP address bindings from the ARP table.
Displays information on learned IP routes from the routing table.
Displays the current events from the switch log buffer.
Displays the currently configured VLANs and their port members.
Displays the current membership of a specified VLAN ID.
Ping a remote host at the specified IP address via HTTP and display returned output.
Trace the route to a remote host at the specified IP address using the specified timeout
value (in seconds) and display returned output.
Reconfigure the user name, password, and enable password used to log on to FTOS on a
switch and run a script.
Important: Use this option to ensure that the user credentials applied by Smart Scripting
to run scripts on a switch are the same values as those configured on the FTOS CLI with
the username command.