Dell FORCE10 Open Automation Configuration page 67

show vmmap
Syntax
Defaults
Parameters
interface
Command Modes
Command
Version 8.3.8.0
History
Version 8.3.5.1
Version 8.3.3.4
Usage
Information
Related
hypervisor
Commands
Example
FTOS#show vmmap gigabitethernet 0/32
VM Name
Redhat_207_03_nfs
Redhat_207_03_nfs
Display the virtual machines accessed on a switch interface.
show vmmap interface
None
Display information on the virtual machines accessed on a specified
interface. Enter one of the following interface types:
•
•
•
EXEC Privilege
Introduced on the S4810.
Introduced on the S55.
Introduced on the S60.
The command displays information on the virtual machines accessed on a
show vmmap
switch interface, including the virtual machine name, VMAC address, and
corresponding VLAN ID
Define a hypervisor instance.
Note: In show vmmap output, VLAN 1 is displayed as VLAN ID 1; VLAN 4095 is
displayed without a VLAN ID as "- "
For a 100/1000 Ethernet interface or 1-Gigabit Ethernet interface,
enter: GigabitEthernet slot/port
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet slot/port
For a port-channel interface, enter:
port-channel number
Where the valid port-channel numbers are 1 to 128.
VIF
00:0c:29:4f:66:19
00:50:56:92:00:77
Vlan ID
-
138
Virtual Server Networking CLI | 67