Dell FORCE10 Open Automation Configuration page 42

username
z
Syntax
Defaults
Parameters
Command Modes
Command
History
Usage
Information
42 | Smart Scripting CLI
Configure an additional user name and password to be used only to run scripts on a
switch. The user name and password are used to log in to a UNIX shell and apply the
read-write privileges assigned to the user name when a script is run.
username name password password
Enter no username
none
name
password password
CONFIGURATION
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
Version 8.3.5.1 Introduced on the S55.
Version 8.3.3.4 Introduced on the S60.
When you run a script from the FTOS CLI with the
an optional user name to apply the read-write privileges assigned to the user name
when the script is run (see
to remove the user name and password.
Enter a username to access the UNIX shell. The user name must be
less than 16 characters to satisfy the BSD UNIX login requirements.
A username used to run scripts cannot contain special characters.
Enter a password to access the UNIX shell.
Running a Script from the FTOS
script command, you can specify
CLI).