Dell W5300 Workgroup Laser Printer User Manual page 135

Flushing Buffer
Held Jobs may be
lost
Insert Tray <x>
Install <device>
or Cancel Job
Invalid Network
<x> Code
Invalid Standard
Network Code
Load Manual
The printer is flushing corrupted
print data and discarding the
current print job.
The printer memory is too full to
continue processing print jobs.
The specified tray is either
missing or not fully inserted into
the printer.
The printer is requesting that a
specified device be installed so it
can print a job.
<device> is one of the following:
Tray x
Duplex
Env Feeder
The code in an internal print
server is not valid. The printer
cannot receive and process jobs
until valid code is programmed
into the internal print server.
A request for a manual feed job
has been sent to the printer. The
Wait for the message to clear.
Press Go to clear the message and
continue printing. The printer frees
memory by deleting the oldest held
job and continues deleting held jobs
until there is enough printer memory
to process the job.
Press Stop to clear the message
without deleting any held jobs. The
current job may not print correctly.
Press Menu to open the Job Menu
and cancel the current job.
To avoid this error in the future:
Delete fonts, macros, and
other data stored in printer
memory.
Install more printer memory.
The messages 37 Insufficient
Memory and Held Jobs may be
lost alternate on the display.
See also: Using the Print and Hold
function; 37 Insufficient Memory
Insert the specified tray completely into
the printer.
See also: Loading print media in standard
and optional trays
Turn the printer off, install the
specified device, and restart the
printer.
Press Menu to open the Job Menu
and cancel the current job.
Download valid code to the printer internal
print server.
NOTE: You can download network code
while this message is displayed.
Load a sheet of the paper specified
in the second line of the display in