Paper Jam; Duplex Jam; Unsupported Print Cartridge - Dell W5300 Workgroup Laser Printer User Manual

1565 Emul Error
Load Emul Option
2<xx> Paper Jam
23x Duplex Jam
32 Unsupported
print cartridge
34 Short Paper
35 Res Save Off
Deficient Memory
37 Insufficient
Collation Area
match the printer code version.
This error can occur if you update
printer firmware or move a
firmware card from one printer to
another.
The printer detects a jam.
The printer detects a jam in the
optional duplex unit.
An unsupported toner cartridge is
installed.
The printer has determined that
the length of the paper in the
source specified on the second
line of the display is too short to
print the formatted data. For
auto-size sensing trays, this error
occurs if the guides are not in the
correct position.
The printer lacks the memory
needed to enable Resource Save.
This message usually indicates
too much memory is allocated for
one or more of the printer link
buffers.
The printer memory does not
have the free space necessary to
collate the print job.
the download emulator on the firmware
card.
Contact Dell at support.dell.com.
Clear the paper path.
See also: Clearing jams
Clear the paper path.
See also: Clearing jams
Remove the toner cartridge and install a
new one.
See also: Replacing the toner cartridge
Press Go to clear the message and
continue printing. The printer does
not automatically reprint the page
that prompted the message.
Make sure the Paper Size setting in
the Paper Menu is correct for the
size paper you are using. If MP
Feeder Size is set to Universal, make
sure your paper is large enough for
the formatted data.
Press Menu to open the Job Menu
and cancel the current job.
See also: Print media guidelines
Press Go to disable Resource Save
and continue printing.
To enable Resource Save after you
get this message:
Make sure the link buffers are
set to Auto, and exit the
menus to activate the link
buffer changes.
When Ready is displayed,
enable Resource Save from the
Setup Menu.
Install additional memory.
Press Go to print the portion of the
job already stored and begin
collating the rest of the job.
Press Menu to open the Job Menu
and cancel the current job.
See also: Canceling a print job