Wireless Lan - Ricoh SP 5200S Operating Instructions Manual

• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [LAN Type] is displayed when the wireless LAN board is installed.
• When both Ethernet and wireless LAN are connected, the selected interface takes precedence.
• p.36 "Interface Settings"

Wireless LAN

This section lists the settings required for using the network TWAIN Scanner with a wireless LAN
connection.
For details about how to specify the settings, see "Interface Settings".
Menu
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Wireless LAN Communication Mode
Interface Settings/Wireless LAN SSID Setting
Interface Settings/Wireless LAN Ad-hoc Channel
Network Settings Required to Use Network TWAIN Scanner
User Tool
Machine IPv4 Address
IPv4 Gateway Address
DNS Configuration
DDNS Configuration
IPsec
Domain Name
WINS Configuration
Effective Protocol
LAN Type
Permit SNMPv3 Communication
Permit SSL / TLS
Communication
Host Name
Setting Requirements
Necessary
As required
As required
As required
As required
As required
As required
Necessary
Necessary
As required
As required
As required
Necessary
As required
As required
2
105