Accessing User Tools; Changing Default Settings - Ricoh SP 5200S Operating Instructions Manual

Accessing User Tools

This section describes how to access User Tools menu.
User Tools allow you to change or set defaults.
• Operations for system settings differ from normal operations. Always quit User Tools when you
have finished.
• Any changes you make with User Tools remain in effect even if the main power switch or operation
switch is turned off, or the [Energy Saver] or [Clear Modes] key is pressed.

Changing Default Settings

This section describes how to change the settings of User Tools.
• If Administrator Authentication Management is specified, contact your administrator.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Select the user tool you want to change.
4. Change settings by following instructions on the display, and then press [OK].
• To cancel changes made to settings and return to the initial display, press the [User Tools/Counter]
key.
• For details about specifying System Settings, see "System Settings".
• For details about changing the language, see "Changing the Display Language", About This
Machine.
• For details about checking inquiry and counter, see "Remarks", About This Machine.
20
CCS003