Ricoh SP 5200S Operating Instructions Manual page 256

5. Registering Addresses and Users for Facsimile/Scanner Functions
2. Press [Change] under "TX SUB Code".
3. Enter the SUB Code using the number keys, and then press [OK].
4. To enter a password, press [Change] under "Password (SID)".
5. Enter a password using the number keys, and then press [OK].
6. Press [OK].
To program the SEP Code
This section describes how to program the SEP Code.
1. Press [Adv. Features], and then press [SEP Code].
2. Press [Change] under "RX SEP Code".
3. Enter a SEP Code using the number keys, and then press [OK].
5
4. To enter a password, press [Change] under "Password (PWD)".
5. Enter a password using the number keys, and then press [OK].
6. Press [OK].
To set the International TX Mode
This section describes how to set the International TX Mode.
1. Press [Change] under "International TX Mode".
2. Select [Off] or [On], and then press [OK].
To select the fax header
This section describes how to select the fax header.
1. Press [Change] under "Fax Header".
2. Select [1st Name] or [2nd Name], and then press [OK].
To set label insertion
This section describes how to set label insertion.
When Label Insertion is set to On, the receiver's name and standard messages are printed on the fax
message when it is received at the other end.
1. Press [Change] under "Label Insertion".
2. Press [On].
254