Using Netware; Setting Up As A Print Server (Netware 3.X) - Ricoh SP 5200S Operating Instructions Manual

3. Using a Printer Server

Using NetWare

This section describes the setting procedure for network printers in the NetWare environment. In the
NetWare environment, you can connect the machine as a "print server" or "remote printer".
• IPv6 cannot be used on this function.
3
• This procedure assumes an environment is already prepared for normal NetWare running the
printing service setting.
• The procedure is explained with the following example settings:
• File server's name ...CAREE
• Print server's name ...PSERV
• Printer's name ...R-PRN
• Queue name ...R-QUEUE

Setting Up as a Print Server (NetWare 3.x)

Follow the procedure below to connect the machine as a print server using NetWare 3.x.
1. Start Web Image Monitor.
2. Click [Login].
A dialog box for entering the login user name and password appears.
3. Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network administrator.
The Web browser might be configured to auto complete login dialog boxes by retaining user
names and passwords. This function reduces security. To prevent the browser retaining user names
and passwords, disable the browser's auto complete function.
4. In the menu area, click [Configuration].
5. Under "Network", click [NetWare].
• Print Server Name: Enter the NetWare print server name. To use the interface board as a print
server, enter the name of a print server that is not active on the file server. Use up to 47
characters.
• Logon Mode: Specify whether to designate a file server or NDS tree when logging in to
NetWare.
• File Server Name: When a file server name is entered here, only the specified file server is
searched for. This item is mandatory. Use up to 47 characters.
120