Using Utilities To Make Network Settings; Interface Settings - Ricoh SP 5200S Operating Instructions Manual

2. Connecting the Machine

Using Utilities to Make Network Settings

This section describes how to make network settings using utilities.
You can also specify network settings using utilities such as Web Image Monitor and telnet.
2
• These settings should be made by the administrator, or with the advice of the administrator.
• For details about using Web Image Monitor, see "Using Web Image Monitor".
• For details about using telnet, see "Remote Maintenance Using telnet".
• p.131 "Using Web Image Monitor"
• p.153 "Remote Maintenance Using telnet"

Interface Settings

This section describes how to make Interface settings using utilities.
Change settings by using Web Image Monitor and telnet.
[Network] [Machine IPv4 Address]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network] [Machine IPv4 Address]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network] [Machine IPv4 Address]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network] [IPv4 Gateway Address]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network] [Machine IPv6 Address]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network] [IPv6 Gateway Address]
• Web Image Monitor: Can be used for specifying the setting.
110
[Auto-Obtain (DHCP)]
[Specify] "Machine IPv4 Address"
[Specify] "Subnet Mask"
"Manual Configuration Address"