Setting Up As A Print Server (Netware 4.X, 5/5.1, 6/6.5) - Ricoh SP 5200S Operating Instructions Manual

• NDS Tree: To enable NDS mode, enter the name of the NDS tree you want to log in to. Use
up to 32 alphanumeric characters.
• NDS Context Name: To enable NDS mode, enter the print server context. Use up to 127
characters.
• Operation Mode: Specify whether to use the interface board as a print server or a remote
printer.
• Remote Printer No.: This item is effective when the interface board is specified as a remote
printer. Enter the same number as the number of the printer to be created on the print server (0
to 254 characters).
• Job Timeout: When the interface board is used as a NetWare remote printer, the printer
cannot detect when a print job ends. Therefore, the printer terminates printing when a certain
period of time has elapsed since it last received print data (i.e., when it has not received print
data for a certain period of time). Specify here this period of time (3 to 255 seconds). The
initial value is 15 (seconds).
• Frame Type: Select the frame type from the drop-down menu.
• Print Server Protocol: Select the protocol for NetWare from the drop-down menu.
• NCP Delivery Protocol: Select the protocol for NCP delivery.
6. Confirm the settings, and then click [OK].
Configuration is now complete. Wait several before restarting Web Image Monitor.
7. Click [Logout].
• To check the configuration is correct, enter the following from the command prompt:
F:> USERLIST
• If the printer works as configured, the name of the print server appears as a connected user.
• If you cannot identify the printer you want to configure, check the printer name against the
configuration page printed from the printer.
• If no printer names appear in the list, match the frame types of IPX/SPXs for the computer and
printer. Use the [Network] dialog box of Windows to change the frame type of the computer.
• For details about Web Image Monitor, see "Using Web Image Monitor".
• p.131 "Using Web Image Monitor"

Setting Up as a Print Server (NetWare 4.x, 5/5.1, 6/6.5)

Follow the procedure below to connect the machine as a print server using NetWare 4.x, NetWare
5/5.1, or NetWare 6 / 6.5.
Using NetWare
3
121