Timer Settings - Ricoh SP 5200S Operating Instructions Manual

Timer Settings

This section describes the user tools in the Timer Settings menu under System Settings.
Auto Off Timer
After a specified period has passed, following job completion, the machine automatically turns off,
in order to conserve energy. This function is called "Auto Off".
The machine status after the Auto Off operation is referred to as "Off mode" or "Sleep mode".
For the Auto Off Timer, specify the time to elapse before Auto Off.
You can specify this setting only if [Auto Off Setting] is set to [Enable] in [Administrator Tools] in
[System Settings].
Default:
(mainly Europe and Asia)
[45 minute(s)]
(mainly North America)
[60 minute(s)]
The time can be set from 1 to 240 minutes, using the number keys.
Auto Off Timer may not work when error messages appear.
Depending on which Embedded Software Architecture application is installed on it, the machine
might take longer than indicated to enter Sleep Mode.
Panel Off Timer
Set the amount of time the machine waits before switching the panel off after copying has finished
or the last operation is performed.
Default: [On], [1 minute(s)]
Enter a time interval between 10 seconds and 240 minutes, using the number keys.
Panel Off Timer may not work when error messages appear.
System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the function set in Function
Priority when no operations are in progress, or when an interrupted job is cleared. This setting
determines the system reset interval.
The time can be set from 10 to 999 seconds, using the number keys.
Default: [On], [60 second(s)]
Copier / Document Server Auto Reset Timer (copier/Document Server)
Specifies the time to elapse before copier or Document Server modes reset.
If [Off] is selected, the machine does not automatically switch to the user code entry screen.
The time can be set from 10 to 999 seconds, using the number keys.
Timer Settings
1
31