Burn To Cd-Rom - Xerox DocuMate 3220 User Manual

Burn to CD-ROM

If you have a CD burner attached to your computer, you can scan directly from your scanner onto a CD.
This feature is available only on computers running Windows version XP or later.
—since the files are going to be burned to a CD, all file formats in OneTouch are
Supported file types
available. Note that text file formats are only available if an OCR module or application is installed.
Please refer to Text Formats
installed.
—the Burn to CD-ROM destination is classified as a "Storage Link". To make it available
Destination type
in the destination list, you must select Storage and CD-R/W on the Options tab in the OneTouch
Properties window.
1. Open the OneTouch Properties window.
2. Select as the Destination Application.
Burn to CD
3. Choose a File Format and a Scan Configuration.
4. Click .
OK
5. Now start scanning using the scanning button you set to scan and burn to a CD.
The scanner will start scanning. When finished the file will be saved to the Windows temporary
location for CD files. An information bubble will appear in the Windows notification area telling
you that there are files waiting to be burned to CD.
on page 66 to see a list of text file formats that are available when OCR is
® ®
Xerox DocuMate 3220
User's Guide
77