Scan Configurations
The scan configurations are where you select the scanning resolution, brightness, mode (color, black &
white, or grayscale), and a number of other settings. To see a selected scan configuration's settings,
click its icon. Click the icon again to close the detailed information.
Use
NOTE:
Configure Before Scan
Configure Before Scan
on page 68.
Create a new configuration:
•
Click the
button to create a new configuration starting with the OneTouch default
New
configuration settings.
•
Select a configuration in the list, then click on the
starting with the settings of the currently selected configuration.
Edit or delete a configuration:
Select the scan configuration you want to edit or delete.
•
To delete the configuration, click the
•
To edit the configuration, click the
Edit the settings and click
Your scanner comes with a number of configurations pre-set at the factory. To ensure that your
NOTE:
scanner will always have a set of correct scan configurations, do not delete the pre-set configurations.
We also recommend that you keep those configurations locked so they are not inadvertently deleted.
That way, you will always have the factory-settings available. If you do delete or edit them, and want
to get the factory pre-sets back again, you will need to uninstall then re-install your scanner.
if you want to set the options manually before scanning. See
button.
Delete
button.
Edit
.
OK
Click the icon of a selected
configuration to view its
settings.
Select the scan configuration
to edit or delete. It must be
unlocked, as indicated by not
having a lock displayed here.
button to create a new configuration
Copy
®
Xerox
®
55
DocuMate
3220
User's Guide