Driver Settings - Xerox DocuMate 3220 User Manual

• —the scanner's unique identification number.
Serial number
• —the scanner's base driver version. This is not the OneTouch software revision, TWAIN
LLD version
or WIA driver versions.
• —this is the version of the scanner's TWAIN driver.
Driver version
Power Settings
• —input the number of minutes you want the scanner to wait before it turns itself off.
Power off
Click the green enter button to save any changes in the power off field.
Click the red reset button to reset to the default timeout value.
• —click this button to revert the scanner hardware back to the scanner's firmware
Reset device
defaults. As this option resets the scanner hardware, you will not see a change in the interface
unless the power save time has been changed. Clicking this button includes returning the power
save time-out to the default setting.
Counters
• —click the reset button next to the counter you want to set back to 0.
Counters
You can use this option to monitor the number of scans completed since the last time a part has
been replaced.

Driver Settings

The options in this panel are for configuring how the scanner interface will behave in some scenarios.
Only advanced users should modify any of the options in this section. Options that are not available for
your scanner will be grayed out and disabled.
182 ®
Xerox DocuMate
User's Guide
®
3220