Twain Driver - Xerox DocuMate 3220 User Manual

General
• —this option prevents the user from making changes to the options in the scanner
Lock settings
interface. When the interface opens, only the scanning Presets will be available for a user to select
and use for scanning.
• —select the preset you want to have be the default displayed options in the scanner
Default preset
interface each time it opens.

TWAIN Driver

• —scanning and transfer starts when the scanner detects paper.
Auto transfer
•
Auto close on transfer
• —select this option to prevent this scanner interface from opening when you initiate a
Force UI-less
scan in the scanning application. This option will only work if your scanning application supports
UI-less scanning. You may also need to select Auto close on transfer complete for this option to
work.
•
Preset overrides capabilities
settings and scan without opening this scanner interface. The next time this interface opens, the
last used settings will match the application settings that were used to scan. Select this option to
have the settings reset to the last ones used when this interface was open.
•
Enable user compression
adjustment of the image compression.
•
Remember compression
saved as part of a preset. Select this option to have the compression setting saved.
WIA Driver
•
Use default WIA UI
TWAIN interface in WIA 2.0 applications.
• —select this option to display the TWAIN interface for WIA 1.0 compatible
Emulate WIA 1.0
applications. When this option is selected, WIA 2.0 applications will use the Microsoft WIA
interface.
—the interface closes automatically when scanning is complete.
—some scanning applications have the option to adjust the scan
—this option is enabled only if the scanner and the software allow manual
—when a compression option is available for user adjustment, it cannot be
—select this option to display the Microsoft WIA interface instead of the
® ®
Xerox DocuMate 3220
User's Guide
183