User Mmsid Input - Standard Horizon SPECTRUM GX2350S Owner's Manual

7.7 USER MMSID INPUT

1. Press and hold the CALL/SET key until the SETUP menu is
displayed.
SCRAMBLER
KEY BEEP
TIME SET
>USER MMSID
USER MMSID
– – – – – – – –
USER MMSID
0 – – – – – – –
USER MMSID
0 – – – – – – –
USER MMSID
012345678
7. When the last number of your MMSID is in place, press and hold
down the CALL/SET key to store your MMSID.
User MMSID can be input only twice. If the user tries
to input MMSID more than twice, the radio will show
the display on the right. If the user needs to change
the MMSID more than twice, the transceiver will have
to be sent to Factory Service. Refer to the Owner's
Manual Supplement for address.
page 37
2. Select the USER MMSID in the SETUP menu
with the Channel Selector knob.
A
3. Press the CALL/SET key.
The USER MMSID menu will appear, and the
first space will blink.
A
4. Turn the Channel Selector knob to set the
number (0 to 9 ).
A
5. Press the CALL/SET key to store the set
number.
A
The blinking number is stored, and the next
space will blink.
6. Repeat steps 3 and 4 to set your MMSID.
A
NOTE
Owner's Manual
ERROR TOO
MANY ENTRIES
PRESS
CALL/SET KEY
A
GX2350S