Resetting The Transceiver's Microprocessor - Standard Horizon SPECTRUM GX2350S Owner's Manual

5.14 RESETTING THE TRANSCEIVER'S MICROPROCESSOR

Resetting the microprocessor restores the initial, factory supplied
conditions in the transceiver. These are called the default conditions.
To reset the microprocessor, first turn the transceiver off. Then while
pressing the WX and SCAN keys, turn the transceiver on. The default
conditions are:
• No channels in SCAN memory.
• Channel 16 will be selected when the transceiver is turned on.
• WX channel 01 will be recalled when the WX key is pressed.
• Key beep will be on.
Resetting the microprocessor will not erase DSC MMSID and
Directory Call Waiting information.
page 19
NOTE
Owner's Manual GX2350S