Position Request - Standard Horizon SPECTRUM GX2350S Owner's Manual

>NAME1
NAME2
NAME3
NAME4
JUN15 08:45P
ID987654321
>SEND
EXIT
8. Press the CALL/SET key to resend the INDIVIDUAL CALL.
9. To exit from Individual Call Waiting, select EXIT and press the
CALL/SET key.
10. Turn the Channel Selector knob to select another logged call or to
select EXIT.
11. Press the CALL/SET key to access next logged call or EXIT.

6.8 POSITION REQUEST

The position request mode may be used to show the position of another
DSC radio with this feature. The other vessel must have an operating GPS
receiver connected to its DSC transceiver and must not have its transceiver
set to deny position requests.
>INDIVIDUAL
ALL SHIP
STANDBY
CALL WAIT
ALL SHIP
STANDBY
CALL WAIT
>POS REQUEST
>TOM
MIKE
BOB
DICK
TOM
MIKE
>BOB
DICK
TX HI USA
BOB
page 27
6. Turn the Channel Selector knob to select the
name.
A
7. Press the CALL/SET key to display the logged
call.
A
1. Select a traffic channel, then press the CALL/
SET key. The transceiver will beep, then the
A DSC CALLING menu will appear in the display.
2. Rotate the Channel Selector knob or press the
UP/DOWN keys to select the POS REQUEST.
A
3. Press CALL/SET key to appear the Position
request directory. This directory uses the
A
INDIVIDUAL Directory information.
4. Rotate the Channel Selector knob or press the
UP/DOWN keys to select a name.
A
5. Press the CALL/SET key to transmit the
position request DSC call.
A
Owner's Manual GX2350S