User Mmsi Input - Standard Horizon INTREPID + GX1270S Owner's Manual

7.12 USER MMSI INPUT

1. Press and hold the CALL/SET key until the SETUP menu is
displayed.
KEY BEEP
INDIV RING
TIME SET
>USER MMSI
USER MMSI
– – – – – – – –
USER MMSI
0 – – – – – – –
USER MMSI
0 – – – – – – –
USER MMSI
012345678
7. When the last number of your MMSI is in place, press the CALL/
SET key to store your MMSI.
User MMSI can be input only twice. If the user tries to
input MMSI more than twice, the radio will show the
display on the right. If the user needs to change the
MMSI more than twice, the transceiver will have to be
sent to Factory Service. Refer to the Owner's Manual
Supplement for address.
GX1270S
2. Select the USER MMSI in the SETUP menu
with the UP or DOWN key.
A
3. Press the CALL/SET key.
The USER MMSI menu will appear, and the first
space will blink.
A
4. Press the UP or DOWN key to set the number (0
to 9 ).
A
5. Press the CALL/SET key to store the set
number.
A
The blinking number is stored, and the next
space will blink. To delete previous number,
press the H/L key.
6. Repeat steps 3 and 4 to set your MMSI.
A
NOTE
Owner's Manual
ERROR TOO
MANY ENTRIES
PRESS
CALL/SET KEY
A
page 42