Standard Horizon SPECTRUM GX2350S Owner's Manual page 42

A/B Key
Immediately recalls two user assigned channels from any channel.
IC Key
Activates the intercom mode between the RAM Mic and the transceiver.
Refer to section 8.3, INTERCOM OPERATION.
WX Key
Immediately recalls a weather channel from any channel location. Recalls
the previous channel when the WX key is pressed again.
Secondary use
When holding down the 16/9 key while pressing the WX key, the mode
toggles between USA, International and Canadian.
SCAN Key
1. Starts and stops scanning of programmed channels.
2. If held while the UP or DOWN key is pressed, the radio will show the
channels in scan memory. This function will not work if the unit is scanning.
Secondary use
Press the MEM key to add the selected channel to the transceiver's scan
memory, MEM will appear on the LCD to indicate that the channel has
been entered into scan memory. To delete the channel from scan memory,
press the MEM key until the MEM disappears from the LCD.
If the transceiver is in the MEM-SCAN mode, then the RAM Mic is in
SC mode. If the transceiver is in PRI-SCAN mode, then the RAM Mic
is in PS mode.
page 39
MIC
16/9 A/B
WX SCAN
LAMP LAMP
IC H/L
CALL CALL
Figure 5. CMP23 RAM Mic
Owner's Manual
SQL VOL
NOTE
PWR
GX2350S