Position Request Reply Type - Standard Horizon SPECTRUM GX2350S Owner's Manual

9. Turn the Channel Selector knob to scroll through numbers, 0-9. To
enter the desired number and move one space to the right press the
CALL/SET key. Repeat procedure until all nine space of MMSID
number are entered.
MEM
BOB
>NEXT
EXIT
11. To enter another individual address select NEXT with the Channel
Selector knob and press the CALL/SET key. Repeat steps 4
through 10.
12. To exit the individual directory setup, select EXIT with the Channel
Selector knob and press the CALL/SET key.
Selecting NEXT or EXIT will automatically save the name and MMSID
number into memory.

7.5 POSITION REQUEST REPLY TYPE

1. Press and hold the CALL/SET key until the SETUP menu is
displayed.
LAMP ADJUST
CONTRAST
INDIV DIR
>POS REPLY
>MANUAL
AUTO
4. Turn the Channel Selector knob to select MANUAL or AUTO.
5. Press the CALL/SET key to store a selected reply type.
The LCD display will return to the SETUP menu.
page 33
10. After entering the MMSID number press and
hold the CALL/SET key until the screen
prompts you to select NEXT or EXIT.
NOTE
2. Select POS REPLY in the SETUP menu with
the Channel Selector knob.
A
3. Press the CALL/SET key.
The position request reply type menu will
appear.
A
Owner's Manual GX2350S