Door Handle Adjustment - Alliance Laundry Systems F232135R12 Installation Manual

Door Handle Adjustment

After the machine has been properly installed, the door
handle position must be verified.
1. Remove outer front panels.
2. Remove door lock cover.
3. With the handle in the latched position, the door
handle latch arm blocks the movement of the
locking pin.
4. Reposition the handle to allow the locking pin to
move properly. Begin by loosening the door
hinge nuts with the door closed and the door
handle latched. Refer to Figure 54.
Figure 54
F232135R12
CHM335S
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5. While pushing the door handle down against the
L-catch, retighten the door hinge nuts. Refer to
Figure 55.
Figure 55
6. Verify that when the handle is in the latched
position, the door handle latch arm does not
block the movement of the locking pin.
7. Reinstall the door lock cover.
8. Reinstall the outer front panel.
IMPORTANT: If the door lock and interlock are
not functioning properly after adjustment, call a
service technician.
Installation
CHM336S
75